Baldwin Brass Hardware Depot - Discount Baldwin Brass Door Hardware Images locks

Baldwin tubular prepacked series entry door hardware - The entrance handlesets below are all the currently available Estate series "tubular" sets. These are NOT mortise locks, these all use standard 2-1/8" hole prep as commonly found in most modern standard doors.

Baldwin Brass finishes click here

IMPORTANT! Please see the following PDF file for in depth information on currently available styles in Baldwin tubular (non mortise) front entry sets. Everything you need to know! Click HERE.

The three handlesets pictured below (Soho, Ashton and Landon) are "two point" locks. This means they have a locking thumbpiece AND deadbolt. They require drilling a third hole in the door as shown in the graphic below as well as the downloadable PDF file below.
Soho 85385 Two point locking tubular sets Has locking thumbpiece and matching deadbolt Call for finish availability and pricing Requires drilling a third hole in the door	Download the two point lock installation PDF file click here: TwoPointInstall.pdf
Ashton 85365 Two point locking tubular sets Has locking thumbpiece and matching deadbolt Call for finish availability and pricing Requires drilling a third hole in the door Can be ordered with a round (not egg) knob also	Landon 85345 Two point locking tubular sets Has locking thumbpiece and matching deadbolt Call for finish availability and pricing Requires drilling a third hole in the door Can be ordered with a wave lever also
All Baldwin tubular handlesets below use standard 2-1/8" holes and have single locking points. The bottom thumb pieces do not lock, they have deadbolts in the upper section. Please call or email for pricing and availability.
All of the entrance handlesets show below use conventional 2 1/8" hole prep in the door, these are NOT mortise locks. Any design shown that has a one piece plate on the outside or both sides must have a 5.5" center to center between the two 2 1/8" holes.





















	Entrance Handlesets Estate tubular Entrance Handlesets provide easy installation on pre-bored wood or metal doors with 2 1/8" door preps.. Single and double cylinder functions; inactive "dummy" sets for double doors. Styles that have a plate joining deadbolt and handle MUST have 5.5" center to center hole prep.